Publicidad
Idiomas disponibles
Idiomas disponibles
3.5 Water connection
Depending on the model of the
refrigerator, you can connect it
either to a demijohn or water
mains. First you must connect the
water hose to the refrigerator.
In cases where a
C
demijohn is used, a
separate pump must also
be used.
WARNING:
A
and the pump, if any,
must be unplugged
during connection.
Following parts may not
C
be supplied with your
product since they are not
required when using a
demijohn.
Check that following part have been
delivered together with the product:
External water filter. (If there is
a demijohn connection; it is not
necessary to use a water filter.)
3.5.1 Before Installation
Make sure that you have everything
necessary to ensure proper installation
before proceeding, including:
Your product comes with an internal
water filter for use inside the
fridge. Part number of the filter is
4918450200 and you can use this part
number when ordering replacement
filters.
10
Refrigerator
3.6 Connecting the water
1.
the water hose (A).
2.
downwards firmly to slip it onto
the water inlet valve (C).
3.
hand to secure it onto the water
inlet valve.
hose to the refrigerator
Slip the union (B) onto
Push the water hose
Tighten the union (C) by
Publicidad
