mm thick). Once installation is completed, the uninsulated surfaces of the ducts must be covered with anti-condensation
insulation (for example, expanded neoprene of 6 mm thick).
IMPORTANT
Failure to observe these instructions may cause dripping due to condensation. The manufacturer may not
be held liable for any damage.
♦ Installation of the distrubution duct
Conditioned air can distributes by means of a distribution duct.
Mod. 3500 W, 5300 W
Liquid side
Gas side
Distribution duct
Wiring connec tion port
Mod. 7100 W, 10500 W, 14000 W, 17600 W
Fresh air in take
65
75
Fresh air
Distribution duct
32
Drain pipe
42
68
56
Wiring connection port
2-
150 Distribution duct
2-
170