Parkside PGKGA 40-Li B2 Traduccion Del Manual De Instrucciones Originale página 49

General Notes on Safety
Before working with the equipment,
familiarise yourself with all oper-
ating components. Practice han-
dling the equipment and have the
function, operation and working
methods explained to you by an ex-
perienced user or specialist. Ensure
that you can shut off the equipment
immediately in an emergency. Inap-
propriate use of the device may
result in serious injury.
In the case of an accident or malfunction
during operation, the device must be
switched off immediately and the battery
removed. Treat injuries appropriately or
consult a doctor. For the correction of
faults, read the "Troubleshooting" chapter
or contact our service centre.
RESIDUAL RISKS
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmo-
dified plugs and matching outlets will
reduce risk of electric shock.
GB MT
49