Parkside PGKGA 40-Li B2 Traduccion Del Manual De Instrucciones Originale página 62

GB MT
spring washer (54) as shown.
To fasten, use the assembly spanner
(23) and tighten the nut anticlockwise.
6. Remove the hexagon socket wrench
(22)!
Dismantling is carried out in reverse
order.
Unscrew the nut (left-hand thread):
turn clockwise.
Mount the spool
The protective cover must be
mounted with the extension
when using the thread spool.
(See Chapter: "Removing/
mounting the protective
cover extension")
Do not replace the non-me-
tallic filaments of the spool
end with metallic filaments!
Risk of injury!
1. Remove the rechargeable batteries.
2. Place the device on the ground in a
stable position.
3. Block the mounting spindle (52) using
the hexagon socket wrench (22) as de-
picted.
4. Place the thin washer (53) on the
mounting spindle (52).
5. Screw the spool cap (17) anticlock-
wise back onto the mounting spindle
(52).
Dismantling is carried out in reverse
order.
62
Extend the thread
Your device is equipped with a double-
string activated touch control, i.e. the two
strings are extended when you tap the
cutting head on the ground.
1. Hold the device in operation over a
grassy area and lightly tap the cutting
head a few times on the ground. This
causes the thread to lengthen.
2. The protective cover (
into the protective cover extension
( 16) cuts the thread to the desired
A
length.
If the thread ends can not be
lengthened:
• Turn off the device.
• Press the core insert as far as it will go
and pull firmly on the end of the string.
If no line ends are visible:
• Replace the spool (see chapter on 'Re-
placing the spool').
Attention! Thread remnants
can be projected and lead to
injuries.
A
Switching on and off
The charge levels of the inserted
batteries do not need to be iden-
tical. However, the device will not
start if one of the two batteries is
exhausted.
Ensure your stance is stable and
hold the appliance tightly with both
hands and away from your body.
Before switching the apparatus on,
make sure that it is not touching
any objects.
15) inserted
A