AfG Berlin RDT-304 Manual De Instrucciones, Uso Y Mantenimiento página 21

7.0 ALARMS
The alarms are the oven protection system.
They activate automatically as a pop-up white color with white-red edge.
Very important: in case of an alarm, take note of the code at the bottom on the right hand side to communicate
it to the technical service.
The alarms are divided in 2 groups:
Serious alarms.
Serious alarms, marked with the symbol on side, stop all functions of the oven.
Not serious alarms.
Not serious alarms, marked with the symbol on side, stop only specific functions of the oven.
7.1 SERIOUS ALARMS
Description
It indicates an incompatibility problem between the keyboard and the software
of the motherboard (usually due to the replacement of one of the two compo-
nents).
Oven functioning
The oven is locked. Any action of the operator is possible.
Resetting
The oven turns to be operative and a correct communication between the 2 com-
ponents is established again.
Suggestions for the operator
Disconnect the electric supply.
Call the technical service.
Remarks for the technical service
Update the firmware of the screen and the relay board.
Description
There is a communication problem between the display and the motherboard
that controls the different components.
Oven functioning
The oven is locked.
Any action of the operator is possible.
Resetting
The oven turns to be operative and a correct communication between the 2 com-
ponents is established again.
Suggestions for the operator
Disconnect the electric supply.
Call the technical service.
Remarks for the technical service
Check the connection between the screen and the components motherboard is
efficient. Check the functioning of the 2 components.
VERY IMPORTANT: in case of replacement of one of the 2 components it's neces-
sary to update the software and ensure its configuration corresponds to the oven
model.
21
EN
Code A000
ATTENTION!
CONFIGURATION ERROR
IT IS NECESSARY
TO UPDATE
THE FIRMWARE
OF THE OTHERBOARD
Code A010
ATTENTION!
NO CONNECTION
BETWEEN KEYBOARD
AND BASE
NO POSSIBLE ACTION
CALL TECHNICAL SERVICE