Set Up - Selecting Vehicle Type; (Car-Motorcycle) - Corghi EM 9250 CompactLine Manual De Uso

15.1. SET UP - SELECTING VEHICLE TYPE

Configuration used for enabling motorcycle wheel balancing functions.
Proceed as follows to recall this programme:
- press the
- use the
- press the
- use the
- press the
CAr on to activate the car working
environment
CAr off to activate the motorcycle
working environment
- press the
Warning
Proceed as follows to balance a motorcycle
wheel:
- remove the hub;
- fit the motorcycle wheel adapter A on the
wheel balancer as shown in Fig. 21;
- insert the two screws that are supplied in the holes
on the wheel contact flange;
- tighten the screws on the adapter making sure that it
rests on the flange correctly;
- montare l'albero da moto sull'adattatore;
- mount the wheel after selecting the centring cones (one
for each side of the wheel), tighten with the appropriate
ring nut using the spacers necessary for coupling the
securing cones to the threaded part of the shaft.
- mount the relative extension (Fig.22) on the internal
measuring arm.
- set the wheel data as shown in the paragraph "Enter-
ing wheel dimensions".
126

(CAR-MOTORCYCLE)

key
keys to search for SEt UP
key to confirm
keys to search for CAr on (or CAr oFF if previously set)
key to change the setting:
key to confirm and exit.
EM 9250 - EM 9250 C CompactLine Operator's manual
21
22