Set Up - Acoustic Signal; Set Up - Adhesive Weight Application Position - Corghi EM 9250 CompactLine Manual De Uso

Ocultar thumbs Ver también para EM 9250 CompactLine:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

15.9. SET UP – ACOUSTIC SIGNAL
The machine can be configured to beep each time a key is pressed on the keypad.
Proceed as follows to modify this configuration:
- press the
- use the
- press the
- use the
- press the
biP on
to activate the beeper
or biP oFF
to deactivate the beeper
- press the
15.10. SET UP - ADHESIVE WEIGHT
The machine makes it possible for the operator to select where the adhesive weight should
be applied based on his needs. To select this configuration, proceed as described below:
- press the
- use the
- press the
- use the
line if present)
- press the
132
key
keys to search for SEt UP
key to confirm
keys to search for biP on (biP oFF if the beeper is disabled)
key to change the setting:
key to confirm and exit.
APPLICATION POSITION
key
keys to search for SEt UP
key to confirm
keys to search for ALU H.12 (ALU CLP – ALU H.6 using the LASER
key to change the setting:
EM 9250 - EM 9250 C CompactLine Operator's manual

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Em 9250 c compactline

Tabla de contenido