Corghi EM 9250 CompactLine Manual De Uso página 103

Balancing
Vehicle type
programme
dyn
ALU 1P
ALU 2P
ALU 3
ALU 4
ALU 5
STA
ALU 1
ALU 2
dyn
BIKE
ALU
BIKE
*The machine allows the operator to change the application position of the adhesive
weight from o'clock to 12 o'clock using the CLIP weight holder or 6 o'clock using the LASER
line la based on his requirements.
To change the application position for the adhesive weights, follow the instructions in
the set up menu "Adhesive weight application position ".
EM 9250 - EM 9250 C CompactLine Operator's manual
Inner weight application
type and mode
clip weight to apply
manually at the 12 o'clock
position
Adhesive weight to apply
manually at the 12* o'clock
position or using weight
holder if present
clip weight to apply
manually at the 12 o'clock
position.
adhesive weight to
apply manually at the
12* o'clock position.
clip weight to apply
manually at the 12 o'clock
position
adhesive weight to
apply manually at the
12* o'clock position.
clip or adhesive weight to apply manually at the
12 o'clock position either on the outer or inner side or
at the centre of the rim well clip weight to be applied
manually at the 12 o'clock position
Adhesive weight to
apply manually at the
12* o'clock position
clip weight to apply
manually at the 12 o'clock
position
clip weight to apply
manually at the 12 o'clock
position
adhesive weight to
apply manually at the
12* o'clock position.
External weight applica-
tion type and mode
clip weight to apply
manually at the 12 o'clock
position
adhesive weight to apply
manually at the 12* o'clock
position or using weight
holder if present
adhesive weight to apply
manually at the 12* o'clock
position or using weight
holder if present.
adhesive weight to
apply manually at the
12* o'clock position
adhesive weight to
apply manually at the
12* o'clock position.
clip weight to apply
manually at the 12 o'clock
position
Adhesive weight to
apply manually at the
12* o'clock position
Adhesive weight to
apply manually at the
12* o'clock position.
clip weight to apply
manually at the 12 o'clock
position
adhesive weight to
apply manually at the
12* o'clock position.
UK
103