Corghi EM 9250 CompactLine Manual De Uso página 122

Based on our experiences, the programme can be recalled every time it is convenient to
minimise the running noise produced by the vibrations mentioned above.
The calculations performed by this programme are based on the unbalance values measured
during the last spin performed which must therefore refer to the wheel being serviced.
• Press the
• Use the
• Press the
Programme activation is indicated by the illumination of the LED
OP.1 H.12
- bring the valve to the "12 o'clock" position and press
- make a mark on the tyre 180° from the valve
- remove the wheel from the wheel balancer
- go to the tyre changer and move the mark made in correspondence with the valve
OP.2 180
- press the
- remount the wheel on the wheel balancer
- move the valve to the 12 o'clock position
OP.3 H.12
- press the
OP.4
- perform a spin
122
key.
keys to search for OPt.
key to activate the optimisation procedure.
OPERATING PHASES
key to confirm.
key to confirm.
EM 9250 - EM 9250 C CompactLine Operator's manual
on the display panel.
to confirm