Publicidad
Idiomas disponibles
Idiomas disponibles
!
Avoid pushing or dragging the equipment to
avoid risks of tipping over and damage to the
structure.
The lifting and transportation system of the
packaged product envisions the use of a forklift
truck or a pallet stacker. When using these,
particular attention must be paid to balancing the
weight in order to prevent the risk of overturning
(avoid excessive tilting!).
!
ATTENTION: When inserting the lifting
device, pay attention to the power supply cable and
the position of the feet.
The packaging is made of cardboard and the pallet
of wood. A series of symbols is printed on the
cardboard
packaging,
accordance with international standards, the
provisions to which the appliances are subjected
during loading, unloading, transport and storage.
TOP
FRAGILE
HANDLE
WITH CARE
6.2.
Installation
Commissioning and installation procedures
are to be performer by qualified personnel.
!
Installation and assembly operations must be
carried out in accordance with current safety
regulations.
!
The equipment used for installation and
assembly operations must comply with current
safety standards.
All the installation phases must be considered,
from the moment of creation of the general plan.
The installation area must be equipped with all
power supply and production residue drainage
connections and must be suitably lit and respect
current laws regarding hygiene and sanitary
requirements.
which
highlights,
in
DO NOT EXPOSE
TO HUMIDITY
On delivery, check that the packaging is intact and
has
not
undergone
transportation.
The transportation company must be notified of any
damage immediately.
The appliance must be unpacked as soon as
possible to check that it is intact and undamaged.
Do not cut the cardboard with sharp tools so as not
to damage to the steel panels underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
Contact the dealer immediately if there are any
anomalies.
On stainless steel equipment, carefully remove the
protective film from the inner and outer walls,
avoiding the use of metal tools.
If adhesive remains on the walls of the machine,
remove it using a non-corrosive solvent; rinse and
dry thoroughly after cleaning. It is advisable to
apply a protective oil layer to all steel surfaces.
!
Packaging elements (nylon bags, polystyrene
foam, staples ...) must not be left within reach of
children.
Remove the protective PVC film from the internal
and external walls, avoiding the use of metal tools.
Packaging must be disposed of in accordance with
the regulations in force in the country where the
equipment is used.
The
performance
guaranteed with a room temperature of 32°C. A
higher
temperature
performance and, in more serious cases, cause the
appliance's protections to start up.
Therefore, consider the most critical room
conditions that can be reached in that position
before making a choice.
Level the appliance by acting on the individual feet.
!
It is essential that the equipment is level;
otherwise, the operation of the machine may be
impaired
Install the equipment so that the workstation is
positioned in front of the control panel.
11
ENGLISH
any
damage
during
of
the
appliance
is
can
compromise
its
GB
Publicidad
