Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature Slow Cooking Cycle
By selecting the slow cooking cycle at temperature,
the system proposes following screenshot :
By pressing the area
possible to change the cooking chamber operating
temperature.
By pressing the area
possible to change the product temperature at the
end of the cycle.
By pressing the area
possible to change the fan speed during the slow
cooking phase.
By pressing the area
phase, a blast chilling phase will be enabled; the
corresponding area will be enlightened
system proposes following screenshot :
Within this screen it is possible to set various
parameters related to the blast chilling phase (see
chapter "Temperature Blast Chilling").
Press the area
on top on the left to go back to
the slow cooking screen.
By pressing the area
phase, a maintaining phase will be enabled; the
it is
it is
it is
after the slow cooking
. The
after the slow cooking
33
corresponding area will be enlightened
system proposes following screenshot :
Within this screen it is possible to set various
parameters related to the maintaining phase.
By pressing the area
possible to change the cooking chamber operating
temperature during the maintaining phase.
By pressing the area
possible to change the fan speed.
Press the area
on top on the left to go back to
the slow cooking screen.
To confirm the slow cooking cycle settings press
the area
on the right bottom.
If a slow cooking cycle combined with a maintaining
cycle has been selected, the display will look as
follows :
If a slow cooking cycle combined with an intensive
blast chilling (HARD) cycle has been selected, the
display will look as follows :
ENGLISH
. The
it is
it is
GB
Publicidad
