Hach 8398 Serie Manual Del Usuario página 6

Figure 3 Mounting examples
1 Sanitary (CIP) flange mount
2 Union T-mount
Section 4 Operation
4.1 User navigation
Refer to the controller documentation for the touchscreen description and navigation information.
4.2 Configure the sensor
Use the Settings menu to enter identification information for the sensor and to change options for
data handling and storage.
1. Select the main menu icon, then select Devices. A list of all of the available devices shows.
2. Select the sensor and select Device menu > Settings.
3. Select an option.
Option Description
Name Changes the name that corresponds to the sensor on the top of the measurement screen.
The name is limited to 16 characters in any combination of letters, numbers, spaces or
punctuation.
Sensor S/N Lets the user enter the serial number of the sensor. The serial number is limited to
16 characters in any combination of letters, numbers, spaces or punctuation.
Measurement type Changes the measured parameter to Conductivity (default), Resistivity, Salinity TDS (total
dissolved solids), or Concentration.
When the parameter is changed, all other configured settings are reset to the default
values.
6 English
3 End of pipe immersion
4 Ball valve insertion