Granita Production; Coffee Granita; Granita Siciliana - Taylor C116 Manual De Uso Y Manutención

- Press STOP
(↓)
processing time for the production of granita. Once the required value has been set,
press DELIVERY
The maximum programmable time is 10 minutes.
- During this cycle the compressor keeps on working without interruptions, while the
agitator stops for 10 seconds and runs for half a second alternately. After the
programmed time has elapsed, the PRODUCTION pushbutton blinks and an
intermittent beep is released.
- Press the STOP pushbutton and deliver the product.
decrease or increase the required consistency value (within a range between 120 and
180). After setting the required value, press the DELIVERY pushbutton
the programme and start the cycle.
The recommended value ranges between 140 and 160.
- During this cycle the compressor and the agitator keep on working without
interruptions. Once the programmed consistency value has been reached, the SEMI-
AUTOMATIC pushbutton blinks and an intermittent beep is released.
- Press the STOP pushbutton and deliver the product.
13 - ENGLISH

5.4 GRANITA PRODUCTION

5.4.1 "COFFEÈ" GRANITA (crushed-ice drink)
In this production cycle it is possible to set
programme the processing time and not the
consistency value as for the ice-cream automatic and
semi-automatic production cycles.
- To switch to the GRANITA CAFFE' function
mode,
pushbuttons simultaneously. The SET led lights up to
signal that the GRANITA mode is now active and the
display visualises the last time value (expressed in
minutes) which has been set manually.
and CLEANING
(↑)
to confirm the programme and start the cycle.
(↔)
5.4.2
crushed-ice drink)
In this production cycle it is possible to set
programme the consistency values, exactly as the ice-
cream semi-automatic production cycle.
- To switch to the GRANITA SICILIANA function
mode, press the STOP and SEMI-AUTOMATIC
pushbuttons simultaneously. The SET led lights up to
signal that the GRANITA mode is now active and the
display visualises the last consistency value which
has been set manually.
- Press STOP
press the STOP
pushbuttons to decrease or increase the
GRANITA "SICILIANA"
and CLEANING
(↓)
and
and PRODUCTION
(Sicilian-style
and
pushbuttons to
(↑)
to confirm
(↔)