Publicidad
Step 16
Fasten an EXTENSION SLIDE (45MC) to each LARGE DRAWER SIDE (D360) as shown. Use three BROWN 7/16"
å
LARGE HEAD SCREWS (6S) in each EXTENSION SLIDE.
Repeat this step for the other large drawer.
å
Fasten a LOCK BRACKET (9J) to two large drawers exactly as shown. Use a BROWN 7/16" LARGE HEAD
å
SCREW (6S) through the oblong hole in each LOCK BRACKET and into the exact hole shown in the LARGE
DRAWER SIDES (D360).
NOTE: The LOCK BRACKETS must be fastened in the exact locations shown. Be sure to use the oblong hole in
å
each LOCK BRACKET. Do not use the round hole.
IMPORTANT: The drawer with the LOCK BRACKET toward the bottom will be used as the top drawer. The
å
drawer with the LOCK BRACKET toward the top will be used as the bottom drawer.
9J
Use the oblong hole.
BROWN 7/16" LARGE HEAD SCREW
(20 used in this step)
www.sauder.com/services
Open end
TOP DRAWER
D360
D360
6S
Open end
BOTTOM DRAWER
D360
109843
Use the oblong hole.
9J
Open end
D360
Page 21
Publicidad
