Publicidad
Step 18
Fasten the SIDE RAILS (V) to the BACK RAIL (W). Use two BLACK 1-1/4" FLAT
å
HEAD SCREWS (7S).
Fasten both SIDE RAILS (V) and the BACK RAIL (W) to the fi nished surface of
å
the KEYBOARD SHELF (T). Use six BLACK 1-1/4" FLAT HEAD SCREWS (7S).
NOTE: You should start each SCREW a few turns before tightening any of them.
å
Fasten the STRIKE CATCH (34F) to the inside of the KEYBOARD FRONT (U) as
å
shown. Use two BROWN 7/16" LARGE HEAD SCREWS (6S).
Fasten the V-CATCH (33F) to the left SIDE RAIL (V) as shown. Use two BROWN
å
7/16" LARGE HEAD SCREWS (6S).
NOTE: Be sure to position the STRIKE CATCH and V-CATCH as shown.
å
33F
34F
BROWN 7/16" LARGE HEAD SCREW
(4 used for the CATCHES)
www.sauder.com/services
Finished edge
V
U
6S
W
T
109843
7S
BLACK 1-1/4" FLAT HEAD SCREW
(8 used in this step)
Finished edge
V
Page 23
Publicidad
