Publicidad
Idiomas disponibles
Idiomas disponibles
5.2.7. Capacitance Test
• The capacitance value is obtained by performing an insulation
resistance measurement.
Access the MENU using the
Use the control
Use the control
Parameters
Use the control
Capacitance Test.
Wait for the test to finish. The results screen will appear:
Measured resistance
Applied voltage
Absorption rate
Capacitance
NOTE: The DD test depends on the Capacitance test, ie disabling the
Capacitance test also disables the DD test.
button.
, select SETUP TEST and press
MODE SELECTION
SETUP TEST
LANGUAGE
, select CAPACITANCE TEST and press
=
SETUP TEST========
TEMPORIZED TEST
STEP VOLTAGE TEST
RAMP TEST
D.D. TEST
CAPACITANCE TEST
, select ON to activate or OFF to deactivate the
28
.
=
Duration of the test
Leakage current
Polarization index
Dielectric discharge
.
Publicidad
