Publicidad
Idiomas disponibles
Idiomas disponibles
•
Before to use this instrument the User guide and Safety warnings must
be read and understood.
•
Safety procedures and rules for working near high voltage energized
systems must be observed during the use of this equipment. The
generated voltages may be dangerous.
•
Do not connect or disconnect the test leads during the measurement.
•
Do not touch the test leads before the high voltage indicator turn-off.
•
Be careful not to make short-circuit between the high voltage terminals
and the "R" or "Guard" terminals while a measurement is running,
because it could be dangerous for the operator.
•
Be sure that there are not any voltage difference between the points to
which the equipment will be connected to, neither between them and
ground.
•
The panel, terminals and connectors of the equipment must stay dry and
clean.
•
Use only accessories / replacement parts provided by the manufacturer.
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.
Safety warnings
4
Publicidad
