Publicidad
Idiomas disponibles
Idiomas disponibles
6.2. "TIMER" Mode
• Access the device's MENU using the
• Use the control
• Use the control
• Configure the test parameters (see Setting the measurement modes,
item 5.2.2. "TIMER" Mode , pg. 19).
The test voltage is the only parameter that can be modified during
the test.
• Press the V test key
press one of the voltage adjustment keys (
preprogrammed voltage (
voltage value.
• Press
to start the test. The equipment will start applying high
voltage and the high voltage LED (
test number will be displayed and then the measured resistance value:
, select MODE SELECTION and press
MODE SELECTION
SETUP TEST
LANGUAGE
, select TEMPORIZED TEST and press
=
SETUP TEST========
MANUAL TEST
TEMPO
RIZED TEST
STEP VOLTAGE TEST
to activate the step voltage adjustment then
,
,
TEMP
U < 15 V
Vtest: 0.500
RMIN:----
06/03/2018
38
button.
=
or
or
) or use
10:00
12:00
F53-11
) will light up. The
.
.
). Select a
to adjust the
Publicidad
