Grillo FD 2200 4WD Manual De Instrucciones página 15

PROCEDURE
check the level
Engine oil
Air filter
check the level
Hydraulic oil
Check that the cooler intake grid is clean
Check that blades are well-sharpened
and well-fixed
Lubricate with grease
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
LUBRICATION POINTS WITH GREASE
Find the lubrication points following the scheme below. Grease the rear axle pivots, the pedals, the PTO
transmission belt guide pulley, the pivot connected to 2 points joint of the cutting deck, the grass catcher lifter arms
and the turbine shaft every 50 hours.
FD2200 4WD/ Translation of the original instructions
MAINTENANCE SUMMARY TABLE
EVERY 8
HOURS
●
change
check ●
replace
replace
●
AFTER 20 EVERY
HOURS 50
HOURS
●
(first
change)
●
● ●
● ●
13
EVERY ONCE A YEAR
100 OR EVERY 250
HOURS HOURS
●
‫٭‬
‫٭‬
(first change after
500 hours)