Descargar Imprimir esta página

Angelo Po 0S0VT1IB Manual De Uso página 51

Plancha de induccion en vitroceramica

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

SERVICING
WARNING: Before starting any clean-
ing procedure, disconnect the power supply
using the switch-disconnector and allow the
appliance to cool.
The following precautions are also important.
WARNING: When using detergents,
rubber gloves, protective mask and safety
goggles must be worn in accordance with
the relevant safety regulations.
– Clean all parts of the appliance with warm
water,
food-approved
non-abrasive materials only.
– Thoroughly clean all parts which come into
direct or indirect contact with foods and all
surrounding areas.
– After use, clean the accessories with a suit-
able grease-remover product. We recom-
mend washing them in the dishwasher.
WARNING: Never use products con-
taining substances that are harmful or dan-
gerous for people's health (solvents, fuels,
etc.).
– Rinse surfaces with drinking water and dry
them.
– Pressurised water jets may only be used on
external parts.
– Take special care not to damage stainless steel
surfaces. In particular, do not apply corrosive
products, do not use abrasive materials or
sharp tools.
3378781_ut_GB
detergents
and
– Remove food residues immediately before
they harden.
– Remove the limescale deposits which may
form on some of the appliance surfaces.
– To maintain hygiene and protect the food
processed from all forms of contamination,
all elements in direct or indirect contact with
foodstuff s and all surrounding zones must be
cleaned thoroughly.
– For these operations, use only food-approved
detergents, and never use fl ammable prod-
ucts or products which contain substances
harmful to people's health. Clean only when
reasonably necessary and at the end of each
session of use.
– When cleaning and sanitising the appliance
with detergents, wear personal protection
equipment (gloves, masks, goggles, etc.) as
required by the applicable health and safety
legislation.
– At the end of each session of use, make sure
that the appliance is off and not in stand-by,
and that the power supply lines are discon-
nected.
– In case of lengthy downtimes, as well as dis-
connecting all supply lines it is also essential
to clean all internal and external parts of the
appliance and the surrounding environment
thoroughly, complying with the Manufactur-
er's instructions and the relevant applicable
laws.
– When washing the appliance, do not point
pressurised water jets at internal parts.
ENGLISH
23

Publicidad

loading