Publicidad
Idiomas disponibles
Idiomas disponibles
FAULTS
The appliance has been tested before com-
missioning. The information provided below
is intended to help identify and correct any
anomalies and malfunctions which might oc-
cur during use.
Some of these issues may be resolved by the
user, whereas other issues require specifi c
technical knowledge or skill, and therefore
they must be dealt with by qualifi ed staff with
recognised experience acquired in the specifi c
sector of operation.
Issues
The cooking zones do
not turn on
Mains light indicator
fl ashes once every 2
seconds
Mains light fl ashes once
a second
3378781_ut_GB
FAULTS
TROUBLESHOOTING
Causes
Incorrect electrical connec-
tion
Power regulator failure.
Switch faulty
Pan bottom diameter less
than 12 cm
Unsuitable cookware
Pan not correctly positioned
on the cooking zone
Pan empty
Cooling air duct obstructed
Room temperature too high
NOTE:
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website www.
angelopo.com.
Check the wiring connection.
NOTE: Contact the af-
ter-sales service.
Replace the regulator
NOTE: Contact the af-
ter-sales service.
Replace the switch.
NOTE: Contact the af-
ter-sales service.
Use cookware with the characteris-
tics recommended by the manufac-
turer
Use cookware with the characteris-
tics recommended by the manufac-
turer
Position the pan correctly
Fill the pan
Check the cooling air duct and clean
it if necessary
NOTE: Contact the af-
ter-sales service.
Lower the room temperature
ENGLISH
Remedies
25
Publicidad
