Descargar Imprimir esta página

Angelo Po 0S0VT1IB Manual De Uso página 52

Plancha de induccion en vitroceramica

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
To carry out this operation, proceed as follows.
Turn off the equipment and allow it to cool.
1)
Turn off the switch-disconnector to cut off the
2)
power supply.
Clean the hob thoroughly with a sponge and
3)
normal detergents, rinse with plenty of water
and dry.
WARNING: Do not point water jets
onto the plates when still hot as this can
damage them.
From time to time, after cleaning the plates,
4)
apply a small amount of linseed oil or a similar
product on the cooking surface.
To carry out this operation, proceed as follows.
Switch off the appliance.
1)
Turn off the switch-disconnector to cut off the
2)
power supply.
Remove the air fi lter, located under the equip-
3)
ment, and clean it with a suitable degreaser.
We recommend washing them in the dish-
washer.
24
CLEANING THE HOB
CLEANING THE AIR FILTER (0S0VT1W)
SERVICING
3378781_ut_GB

Publicidad

loading