Publicidad
Avisos cuando se produce un error
Main power usage threshold exceeded.
Unexpected port assembly. Change device name to
%s.
Unknown SFP module on <número de puerto>
(vendor: \"%$str\").
SFP module on <número de puerto> is not suppor‐
ted and remains deactivated.
Signaling contact controlled by user configuration. Signaling contact controlled by error state.
Local loop detected on <número de puerto>. Port
disabled.
Local loop detected on <número de puerto>. Port
disabled for <número> seconds.
Remote loop detected on <número de puerto>.
Port disabled.
Remote loop detected on <número de puerto>.
Port disabled for <número> seconds.
Local loop detected on <número de puerto>.
Remote loop detected on <número de puerto>.
Standby <partner | observer> conflicts with <active
| passive> state.
Standby <partner | observer> conflicts with obser‐
ver <on | off> configuration.
Standby <partner | observer> conflicts with <mas‐
ter | slave> role.
Standby slave: At least one port has no link.
FMP-Port <número de puerto>: Maintenance requi‐
red, Rx-Power: <potencia recibida> [dBm], Power
Loss: <disipación> [dB]
FMP-Port <número de puerto>: Maintenance de‐
manded, Rx-Power: <potencia recibida> [dBm], Po‐
wer Loss: <disipación> [dB]
POF-Port <número de puerto>: Maintenance requi‐
red, Rx-Power: <potencia recibida> [dBm], Power
Margin: <reserva de potencia> [dB]
POF-Port <número de puerto>: Maintenance de‐
manded, Rx-Power: <potencia recibida> [dBm], Po‐
wer Margin: <reserva de potencia> [dB]
Link Check: Broken link on <número de puerto>
indicated by <descripción del error>. Port disabled.
Link Check: Multiple partners detected on <núme‐
ro de puerto>.
Link Check: Unapproved configuration. Disable
Link Check on <número de puerto>.
SCALANCE X-300/X408-2 V4.1.7 / SCALANCE X414-3E V3.10.2
Manual de configuración, 05/2023, C79000-G8978-C187-34
D.1 Mensajes de error del SCALANCE X300 / X400
Avisos tras solucionar un error
Main power usage below threshold again.
Port assembly known.
Unknown SFP module on <número de puerto> re‐
moved.
Not supported SFP module on <número de puerto>
removed.
<número de puerto> is enabled again after being
disabled by loop detection.
<número de puerto> is enabled again after being
disabled by loop detection.
<número de puerto> is enabled again after being
disabled by loop detection.
<número de puerto> is enabled again after being
disabled by loop detection.
<número de puerto> is enabled again for loop de‐
tection.
<número de puerto> is enabled again for loop de‐
tection.
Standby <partner | observer>'s state conflict resol‐
ved.
Standby <partner | observer>'s observer configura‐
tion conflict resolved.
Standby <partner | observer>'s role conflict resol‐
ved.
Standby slave: All ports linked up.
FMP-Port <número de puerto>: OK
FMP-Port <número de puerto>: OK
POF-Port <número de puerto>: OK
POF-Port <número de puerto>: OK
Link Check: Link on <número de puerto> OK. Port
enabled.
Link Check: Partner detection reset on <número de
puerto>.
Link Check: Unapproved configuration resolved on
<número de puerto>.
Anexo D
405
Publicidad
