Publicidad
Anexo D
D.1 Mensajes de error del SCALANCE X300 / X400
Avisos informativos sobre la aparición de un evento
Los avisos siguientes sirven para informar de eventos que no están directamente relacionados
con un estado de error (LED de error):
• User entry: <entrada de usuario>
• Unknown command <comando> for <nombre de protocolo> protocol received.
• Device is configured to ring <off | ARD | HRP client | MRP client | HRP manager | MRP manager>.
• Standby function <Master | Slave>.
• Observer started.
• Observer stopped.
• Observer contacted Redundancy Manager <dirección MAC>.
• Standby is waiting for <partner | observer>.
• Standby <partner | observer> connected to <master | slave> <dirección MAC> <número de
puerto>.
• Standby <partner | observer> lost connection to <master | slave> <dirección MAC> <número
de puerto>.
• Port <número de puerto> is isolated ring port.
• Port <número de puerto> is static ring port.
• No SMTP connection to mail server.
Server IP address <dirección IP> TCP port <número de puerto TCP>.
• No SMTP application found.
Server IP address <dirección IP> TCP port <número de puerto TCP>.
• SMTP (E-Mail) connection aborted. Server IP address <dirección IP>.
• Unable to send message to syslog server. Please check syslog socket configuration.
• Connected to syslog server.
• SNMP: Authentification failure.
• R)STP: new root bridge detected.
• (R)STP: topology change detected.
• Unable to send E-Mail(s). Please check IP configuration.
• Unable to send trap(s). Please check IP configuration.
• Failure reply code <código de error> from SMTP server.
• Restart requested.
• No C-PLUG found. Internal flash memory used.
• An empty C-PLUG was found.
• C-PLUG format request.
• A filled C-PLUG was found.
• A corrupted C-PLUG was found.
• C-PLUG removed at runtime.
406
SCALANCE X-300/X408-2 V4.1.7 / SCALANCE X414-3E V3.10.2
Manual de configuración, 05/2023, C79000-G8978-C187-34
Publicidad
