Interpump Group 70 HT Serie Manual De Uso Y Mantenimiento página 20

9. The high pressure system must not be started up and run
under pressure without all team members in position and
without the Operator having already directed his/her lance
toward the work area.
3.5 Safety during system maintenance
1. High pressure system maintenance must be carried out
in the time intervals set by the manufacturer who is
responsible for the whole group according to law.
2. Maintenance should always be performed by trained and
authorised personnel.
3. Assembly and disassembly of the pump and the various
components must only be carried out by authorised
personnel, using appropriate equipment in order
to prevent damage to components, in particular to
connections.
4. Always only use original spare parts to ensure total
reliability and safety.
5 TECHNICAL CHARACTERISTICS
Model Rpm
1450
HT 7095H 1350
1200
6 DIMENSIONS AND WEIGHT
For Standard Version pump dimensions and weight, refer to Fig. 2.
Dry weight 37 kg.
4
Each pump has an identification label, see pos.  of Fig. 1
which shows:
- Pump model and version
- Serial number
- Max revs
- Absorbed power HP - kW
- Pressure bar - P.S.I.
- Flow rate l/min - Gpm
Flow rate
l/min Gpm
100 26.4
95 25
85 22.5
20
PUMP IDENTIFICATION
Model, version and serial number must always be
indicated when ordering spare parts
Pressure
bar psi
90 1305 17.2
100 1450 18.2
100 1450 16.3
Fig. 1
Power
kW HP
23.4
24.7
22.1
Fig. 2