Publicidad
Idiomas disponibles
Idiomas disponibles
16.2 Cleaning
Ceramic hob, Housing and Operating Panel
Clean the hob, the housing of the device and the operating panel with a soft, slightly
damp cloth.
Attention
► In order not to damage the plastic components, do not use any solvent-based cleaning
detergents such as, for example, petrol.
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
17.1 Safety notices
Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
17.2 Fault indications
In the event of a fault, an error code will appear in the display; it describes the
cause of the fault.
Display Description
E05
Overheating Protection
This means that the temperature had increased to a temperature of 270°C.
In this case the device turns off automatically in order to avoid damages.
In case of "E05" please pull the power plug in order to reset the device.
After this you can use it again as usual.
Please note
► If error messages continue to be displayed after an extended waiting period or after
restarting the appliance, then it must be sent to Customer Service to be examined.
47
Publicidad
