Publicidad
Idiomas disponibles
Idiomas disponibles
2 SAFETY RULES
2.1- General.
1. The grass trimmer was designed to cut grass and small soft vegetal. Never use the trimmer for any
other purpose.
2. The nylon cutting heads must meet the trimmer rotation rate requirements. Use nylon cords desig-
nated for the nylon cutting heads.
3. After starting the engine, pull the throttle lever gradually. The engine speed increases and the blade
will start rotating.
4. When the throttle lever is released, the engine goes back to idle speed automatically.
5. Operate the unit at full throttle while cutting. Best fuel efficiency is obtained by releasing the throttle
when swinging back after cut.
6. The blade rotates counterclockwise. For best performance and to minimize being struck by debris,
move the blade from right to left while advancing on your works.
2-2. Notes when using the unit.
1. Wear close fitting, tough work clothing that will provide protection, such as long slacks or trousers,
safety work shoes, heavy duty work gloves, head protector( helmet ), a safety visor, or safety goggles
for eye protection and a good grade of ear plugs or other sound barriers for hearing protection.
2. Refuel in a safe place. Open fuel cap slowly to release any pressure which may have formed in fuel
tank. To prevent a fire hazard, move at least 3 meters from fueling area before starting.
3. Comply with all fire prevention regulations. Compliance with all local laws is the user's responsibil-
ity. Your unit comes with a spark arrester screen furnished in the user kit. Replacement spark arrester
screen kits are available from distributor.
4. Turn off the unit before setting it down.
5. Always hold unit firmly with both hands, the thumb and fingers encircling the handles.
6. Keep all screws and fasteners tight. Never operate your equipment when it is improperly adjusted or
not completely and securely assembled.
7. Keep handles dry, clean and free of fuel mixture.
8. Keep cutting-head as close to ground as practical. Avoid hitting small objects with cutting-head.
When cutting on a slope, stand below cutting-head. Never cut or trim on a hill or slope, etc. if there
is the slightest chance of slipping, sliding or losing firm footing.
9. Check area you will be trimming for debris that may be struck or thrown during operation.
10. Keep all parts of your body and clothing away from cutting-head when starting or running engine.
Before starting engine, make sure cutting-head will not come in contact with any obstacle.
11. Stop engine before examining cutting line.
5
Publicidad
