Publicidad
Idiomas disponibles
Idiomas disponibles
6. Then insert an Allen wrench 4 mm in the holes to stop moving the clamp. Fig. 11
7. Tighten the blade cutting head counterclockwise with hand into the gear housing.
8. Remove the Allen wrench 4 mm.
9. When not using the blade, please to store well with blade protect cover. Fig. 12
6.4- Trimming
1. Before you operating with D-Loop Handles; wear harness and hold brush cutter handle to start oper-
ating.
2. Move the brush cutter attachment from left to right If you're cutting grass with the left side of the
head, the head might throw debris subject at you, a hazardous situation. Never use the left side of a
nylon cutting head to cut
3. To slant the nylon cutting attachment or blade cutting attachment downward and toward the cutting
side. Take care not to drag the head on the ground.
Publicidad
