Publicidad
Idiomas disponibles
Idiomas disponibles
11.8- Carburetor
The engine has been adjusted before shipment. In the case of engine trouble, Contact
you're nearby distributor because the engine trouble is not caused by a faulty carburetor
only. An engine that is not adjust properly will damage not only the carburetor but also
the engine it's self.
11.9- Cleaning muffler
Cleaning muffler carbon after 50 hours of operation as follows:
1. Remove the muffler guard and muffler.
2. To prevent carbon from enter the cylinder, pull the starter to turn the crankshaft, blocking the exhaust
opening with the piston.
3. Scrape carbon from the cylinder exhaust opening with wood, taking care not to damage the surface.
4. Screw the muffler and muffler guard together securely.
5. Be sure to ask your dealer to clean the muffler periodically.
11.10- Sharpen, clean & lubricate the blades
If the cutting blades have become blunt and cutting performance is poor, have the blades sharpened by
an authorized service agent.
Always clean the blades with dry cloth after usage.. Also lubricate the blades with oil before & after us-
age.
11.11- Storing
When shutting sown your trimmer for a long time, store it properly as shown below, so that it will oper-
ate normally when you need it. The Trimmer may not start smoothly if stored improperly.
CAUTION
Publicidad
