Krups BeerTender Manual Del Usuario página 11

10 Information of a legal nature
· These operating instructions contain the necessary
information for the proper use and upkeep of the
appliance.
· It is essential to read this information and comply
with these instructions in order to use and maintain
the appliance in complete safety.
· Please note, moreover, that the contents of these
operating instructions do not form part of a previous
or already existing legal agreement or contract, hence
they do not affect the terms of the latter.
· The manufacturer's obligations are based solely on
the contract of sale, which also contains complete
and exclusive terms pertaining to the warranty service
provided.
· The warranty conditions as set forth in the contract
are neither limited nor extended on the basis of the
explanations herein.
· These operating instructions contain information
protected by copyright.
· They may not be photocopied or translated into
another language without the manufacturer's prior
written consent.
Environment
Environment protection first!
i Your appliance contains valuable materials
which can be recovered or recycled.
 Leave it at a local civic waste collection point.
· Appliances that are no longer used should be
rendered unusable.
· Unplug the appliance and cut the power cable.
· Appliances no longer in use must be taken to a suitable
waste collection facility so that the special components
contained in the appliance may be duly disposed of.
· The "TEM - Module" (or Peltier's cell) must be
disposed of in accordance with the regulations
currently in force in the user's country.
18
12 Troubleshooting
Problem Possible causes
The appliance The appliance is
does not turn not connected to
on. the mains power
supply.
You can The BeerTender
not fit the Keg tap has been
BeerTender activated by hand.
Keg tap in the
tapping unit.
You can not The BeerTender
close the tap Keg tap is not
cover. inserted correctly.
No beer The BeerTender
is being Keg is empty (last
dispensed. level of volume
indicator is blinking).
There is no
keg inside the
BeerTender
appliance (the
4 levels of the
volume indicator
are blinking).
The BeerTender
appliance tap
handle is not
correctly installed/
positioned.
The The BeerTender
BeerTender Keg has not
appliance reached the
produces right dispensing
too much temperature.
foam when
dispensing
beer (see also
chapter 7:
Dispensing
beer).
19
Remedies
Connect the
appliance to the
power supply.
Put the
BeerTender Keg
tap back in its
original position.
Remove the
BeerTender Keg
tap from the
appliance and fit
it again following
chapter 6 – Using
the BeerTender.
Replace the
BeerTender Keg
with a new one.
Install a keg inside
the BeerTender
appliance.
Install/position the
tap correctly.
Allow the
BeerTender Keg
to cool to the
right temperature.
You can rely on
the temperature
indicator on the
control display of
your BeerTender
appliance.