Krups BeerTender Manual Del Usuario página 12

The BeerTender
Keg has been
shaken.
The tap handle is
being moved too
slowly.
Beer flows out The tap handle is not
too slowly. open all the way.
The The BeerTender
BeerTender Keg has not been
appliance is chilled for long
dispensing enough in the
warm beer. refrigerator and
is thus not at
the right serving
temperature.
The beer has been
tapped before
it has attained
the right drinking
temperature (see
temperature
indicator).
The The BeerTender
temperature appliance is
indicator on exposed at a too
the control hot temperature or
display never to direct sunlight
reaches a (see also chapter 5
ready-to-drink – "Cooling the keg"
level. and "Installing the
BeerTender").
The control A warm keg was
display shows installed in a cold
an increasing appliance.
temperature.
The appliance The Beertender has
heats the beer a cooling issue.
instead of
cooling it.
If you have any problems or queries please contact our
Customer Relations Team first for expert help and advice.
(see details per country at the end of this manual)
20
Wait 4 hours before
dispensing beer.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
Open the tap
completely.
Allow the
BeerTender Keg
to cool in the
refrigerator for
about -12 hours.
Allow the
BeerTender Keg to
cool long enough in
the appliance.
Use the appliance
indoor and move
it in a room
where ambient
temperature does
not exceed 30°C.
Allow the BeerTender
system to
compensate effect
of the temperature
change. Displayed
temperature should
start decreasing after
1 hour maximum.
Unplug the
appliance and bring
it to the after-sales
center.