Inserting A Video Cassette - JVC GR-AX827 Manual De Instrucciones

QUICK OPERATION GUIDE
SUPPLY POWER
Hook on.
1
BATT. RELEASE
Using the battery pack
1
Hook-on the battery pack's top end to the
camcorder. (Charging procedure,
2
Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
PLAYBACK
3
PLAY/PAUSE
2
REW
1
Set to "PLAY".
1
Set the power switch to "PLAY".
2
Press REW.
— The tape will automatically stop at the
beginning of the tape.
3
Press PLAY/PAUSE.
— Playback starts and the playback picture
appears in the viewfinder.
•To stop playback, press STOP.
(For more details, pg. 30.)
Or simply play back the tape on a VHS
VCR using the Cassette Adapter
(VHS Playpak). pg. 28
INSERTING A VIDEO
CASSETTE
2
Push in.
1
2
pg. 8)
3
SHOOTING
STOP
1
2
3
• To stop recording temporarily, momentarily
EJECT
1
3
PUSH 2
Insert.
Slide EJECT.
Insert a video cassette.
Press PUSH.
(For more details, pg. 11)
LENS COVER
open/close switch
2
Set to "CAMERA".
3
Recording Start/Stop button
Slide the LENS COVER open/close switch to
open the lens cover.
Set the power switch to "CAMERA".
— The power indicator will light and an
image will appear in the viewfinder.
Press the Recording Start/Stop button.
— Recording starts.
press the Recording Start/Stop button once
again.
(For more details, pg. 14)
5
1