Porsche Home Energy Manager Manual Del Usuario página 22

Start first installation
Start first installation
The installation wizard guides the electrician through
the entire installation process step by step.
e
To complete a step in the installation wizard,
enter the desired setting and confirm with Next .
e
To go back a step, select Back in the Web Appli-
cation. Do not use the browser's Back button.
Information
If the installation process is interrupted, the session
can be resumed after logging in again. After 25 mi-
nutes of inactivity, the user is automatically logged
out of the Web Application.
The installation wizard can only be started as cus-
tomer service. When you log in as a home user, the
prompt for the logout follows after the welcome.
1. Start installation
e
On the start page, select Next to initiate the
configuration steps of the installation wizard.
2. Set language, country and currency
Field Explanation
Language Select the language for the Web
Application.
Country The country of use. The configu-
ration settings are country-spe-
cific. If the information differs
from the actual place of use, not
all settings may be available.
Zip code Zip code for location of use.
20
Field Explanation
Specifying the zip code will allow
for more accurate weather fore-
casts in a later software release.
This will improve the manage-
ment of energy generated from
photovoltaics.
Date and time When connected to a network,
the date and time are automati-
cally applied.
Time zone: Must be selected
manually.
User-defined time: Specify the
current time if the network time
is not available as a reference.
Currency The desired currency.
3. Agree to data transfer
Carefully read the data protection notice for Web
Application of the energy manager.
e
Consent with Next to the data privacy notice.
Information
Legal notes and privacy policy with information on
third-party content and licenses can be called up at
any time using the corresponding link from the Web
Application.
4. Select update and backup
Automatic software updates
Information
For automatic software updates, the energy manager
must have an internet connection.
Software updates are automatically installed when
the function is activated.
e
Activating the Automatic software updates
function.
Automatic backups
When this function is activated, the backups are
automatically stored on the connected USB storage
device.
1. Insert the USB storage medium into one of the
two USB ports of the energy manager (USB stor-
age medium has file system ext4 or FAT32).
2. Activate function.
3. Password assigned: Enter password.
The password protects your data and must be
entered when importing or restoring the backup.
Information
It is still possible to perform a backup manually.
5. Select network connections
To use the energy manager via the Web Application,
the end device (PC, tablet or smartphone) and energy
manager should be in the home network (WiFi, PLC,
Ethernet). All functions of the Web Application can
be used through the internet connection of the home
network.