Descargar Imprimir esta página

Porsche Home Energy Manager Manual Del Usuario página 29

Ocultar thumbs Ver también para Home Energy Manager:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
The following conditions must be met for the func-
tion Self-consumption optimization:
b Photovoltaic system (or another own energy
generator) is configured in the energy manager.
b The charger Porsche Mobile Charger Connect
(USA: Wall Charger Connect) is used.
b Porsche Taycan: Charging profile, which allows
optimized charging, is activated in the vehicle.
Minimum charge is reached. Plug and Charge is
active.
Cost-optimized charging
e
Activate the function via the switch.
The energy manager uses your input electricity tariff
data to generate tariff and power tables that it sends
to the vehicle via the charger. The vehicle uses the
tariff settings to detect the time characteristic of the
charging current price. The vehicle can calculate a
cost optimum and generate a charging plan, taking
into account additional conditions, such as timers,
preconditioning, etc. This is in turn transmitted to the
energy manager, who monitors compliance with the
charging current limit.
If several charging processes are carried out at the
same time, the energy distribution takes place ac-
cording to the option selected under Overload pro-
tection. Porsche Vehicles take priority over other ve-
hicles in terms of the available performance.
e
Activate function.
A timer must be set to optimize costs. Porsche Tay-
can: A profile for optimized charging must also be set
here.
Information
This function is only suitable if there are time-varia-
ble electricity tariffs.
The overload protection of the energy manager can
restrict the distribution if necessary.
13. Summary
The summary shows an overview of your settings.
The entries should be checked again.
Changing settings
e
Select the button for the setting to be changed.
�� The selected installation step is opened and can
be edited.
Display of the table overview:
Connection position the current transformer
(line 1: CTx, whereby x=1–12) and its assign-
ment to one Phase of the in-house power grid
(line 2: L1 to L3).
In lines Power sources and Devices, the config-
ured current sources (house connection and, if
applicable, photovoltaics) and consumers (e.g.
charger) are listed among each other and their
assignment to the corresponding phase (L1, L2,
or L3) or to the current transformer (CTx) is
displayed.
Closing activities
1. Check for a software update underSettings
e Maintenance.
2. Perform a manual backup under Settings
e Maintenance.
After completion of the installation assistant, the
is automatically Web Application forwarded to the
overview.
Start first installation
Information
If important settings are changed in the home setup,
the setup assistant is opened automatically. There,
the assistant must be run through to the end from
the changed step in order to check all settings again.
27

Publicidad

loading