Publicidad
Idiomas disponibles
Idiomas disponibles
TURNING INDICATOR ON/OFF
1. To turn the scale on, short press the ON/ZERO
OFF button. The indicator performs a display test,
momentarily displays software version, then enters
active weighing mode.
2. To turn the scale off, press and hold
the ON/ZERO OFF button until
is displayed.
MENU NAVIGATION
BUTTON MENU
On/Zero
Print
Off
Units
Yes
No
Allows entry into the displayed
menu. Accepts the displayed
YES
setting and advances to next
menu item.
Skips by the displayed menu.
Rejects the displayed setting or
NO
menu item and advances to
next available item.
Moves backwards through upper
and middle level menus. Backs
BACK
out of a list of selectable items
to previous middle level menu.
Exits from menu directly to the
EXIT
active weighing mode.
MENU ITEMS WITH SET NUMBERS
Current number is displayed with all digits flashing.
1.
Press NO to begin editing. The
first digit will begin flashing.
2. Press NO to increase or BACK to
decrease digit value. Press YES to
accept digit value and move
to next. Repeat for remaining digits.
3. Press YES when last digit has
been set.
NOTE: The new setting will
be displayed with all digits
flashing.
PAGE 3 OF 35
OPERATION
OFF
OFF
Function
Tare
Mode
Menu
Back
Exit
000000
100000
100000
100000
4. Press the YES button again to accept setting or NO
to resume editing.
5. To end current menu selection, press YES to advance
to next menu or NO to return to top of current menu.
CHANGE UNIT OF MEASURE
SET UNIT OF MEASURE AT STARTUP
Set the unit of measure displayed at startup to g, kg, lb.,
oz., lb:oz or Auto (last unit in use when power was turned off).
1. Once in the setup menu, press NO until the Power
On Unit setting is displayed.
2. Press YES to enter the Power On Unit setting.
3. Press NO until the desired unit of measure is
displayed.
4. Press YES to accept the new unit of measure.
TURNING INDICATOR ON/OFF
1. To turn the scale on, short press the ON/ZERO
OFF button. The indicator performs a display test,
momentarily displays software version, then enters
active weighing mode.
2. To turn the scale off, press and
hold the ON/ZERO OFF button
OFF
until
is displayed.
ENABLE UNITS OF MEASURE
Units of measure must be enabled in the menu to select
from the PRINTS/UNIT/NO button.
1. Once in the unit menu, you may
turn units of measure on and off.
(See Figure 4)
Figure 4
Reset
Kilograms
Pounds
Grams
Ounces
Pounds:Ounces
End Unit
2. Press YES to accept the current setting (ON or OFF).
3. Press NO to change the current setting (ON or OFF).
AUtO
OFF
UNIt
No, Yes
Off, On
Off, On
Off, On
Off, On
Off, On
Exit UNIT menu
0823 IH-10772
Publicidad
