Publicidad
Idiomas disponibles
Idiomas disponibles
RESET
Set the unit menu to factory
default settings:
NO = Not Reset
YES = Reset
NOTE: If the Legal for Trade menu item is set on,
the settings are not reset.
KILOGRAM UNIT
Set the status:
OFF
= Disabled
ON = Enabled
POUND UNIT
Set the status:
OFF = Disabled
ON = Enabled
GRAM UNIT
Set the status:
OFF = Disabled
ON = Enabled
OUNCE UNIT
Set the status:
OFF = Disabled
ON = Enabled
POUND OUNCE UNIT
Set the status:
OFF = Disabled
ON = Enabled
PAGE 4 OF 35
OPERATION CONTINUED
CALIBRATION MENU
rESEt
INITIAL CALIBRATION
When scale is operated for first time, a zero and span
calibration are recommended to ensure accurate
weighing results.
UNIt
kg
CALIBRATION VALUES
MAX CAPACITY
UNIt
lb
UNIt
g
UNIt
ZERO CALIBRATION
oz
Zero calibration uses one calibration point and is
established with no weight on the scale. Use this method
to adjust for a different static load without affecting the
span or linearity calibration.
UNIt
1.
lb lb:oz
2. Once display shows C.A.L, press YES button.
3. The display shows ZErO. Press YES button.
4. With no weight on the pan, press the YES button
5. The display will show --C--, and then -dONE- when
6. SPAN will show on display next. Press Exit button to exit.
IMPORTANT: Ensure that appropriate
calibration masses are available before
beginning calibration. Calibration weights
are sold separately.
MASS (kg.)
(kg.)
3 kg.
3 kg.
6 kg.
6 kg.
15 kg.
15 kg.
30 kg.
30 kg.
60 kg.
60 kg.
150 kg.
150 kg.
NOTE: Ensure LFT switch/calibration lock is
in unlocked position before performing
calibration.
NOTE: GEO setting can be adjusted according
to your location. (See Geo Code Adjustment on
Page 6)
Long press Menu button until MENU is displayed.
to establish zero point.
zero calibration is complete.
NOTE: If zero calibration has failed, CAL E will
be displayed for three seconds and previous
calibration data will be restored.
MAX CAPACITY
MASS (lb.)
(lb.)
6 lb.
6 lb.
12 lb.
12 lb.
30 lb.
30 lb.
60 lb.
60 lb.
120 lb.
120 lb.
150 lb.
150 lb.
0823 IH-10772
Publicidad
