Publicidad
Idiomas disponibles
Idiomas disponibles
VERIFICATION
A local weights and measures official or authorized
service agent must perform the verification procedure.
Please contact your local weights and measures office
for further details.
SEALING
Once scale has been verified, unit must be sealed to
prevent access to legally controlled settings.
When indicator is connecterd to an
Ohaus Defender 3000 series base with
EasyConnect™ function, no sealing is
necessary. Once indicator or base is
replayed with a new one, error message
Error 8.9
will show on display.
See Figures 6-7 for sealing methods.
Figure 6
Figure 7
PAGE 9 OF 35
OPERATION CONTINUED
Error 8.9
i-DT33P Wire Sealing
Sealing Cover
i-DT33P Paper Sealing
When indicator is connected to a base that does
not include a memory module, but supports load
cell adapter connection, the connection between
the indicatior and base needs to be sealed with a
connector cover, sealing sticker or wire seal.
See Figures 8-9 for connector cover sealing methods.
Wire Seal
Figure 8
Paper Seal
Figure 9
0823 IH-10772
Publicidad
