Publicidad
Idiomas disponibles
Idiomas disponibles
2. Press MODE to go directly to the last selected and edited menu item. If you now repeatedly
press ENTER, you can access the submenu items to make individual settings (DMX start ad-
dress and all operating modes).
• The display can be rotated through 180° by pressing UP when the main display is visible.
• To quickly change a value (e.g. DMX start address), press and hold the UP or DOWN button.
CAUTION: In order to provide protection from water sprays in accordance with the
IP65 protection class, the special DMX input and output sockets must be used with
special IP65-rated XLR connectors, or they must be closed using the rubber sealing
caps. When connected correctly, or when sealed correctly with the rubber sealing
caps, the POWER IN and POWER OUT sockets are protected from water sprays in
accordance with IP65.
OPERATION
MAIN DISPLAY
The main display shows the following information: Current mode (in the example: DMX mode with
start address 001) and W-DMX
W-DMX
™
To pair a W-DMX receiver with a W-DMX compatible transmitter, the Reset command must be
executed in the menu item WDMX under Receiver (select Reset and confirm). The receiver is
now in pairing standby and waiting for a pairing request from a transmitter. Start the pairing by
selecting Link in the menu of the transmitter and confirming; the pairing now takes place auto-
matically. In the same way, several receivers can be paired simultaneously or one after the other
to a transmitter (e.g. for master / slave operation). A W-DMX connection is always maintained
until the connection is disconnected by means of the Reset command in the receiver or the Unlink
command in the transmitter, regardless of whether a device has been disconnected from the
power supply in the meantime.
14
status.
™
W-DMX
Status
™
DMX Address
001
Current operating mode
Publicidad
