Cameo ZENIT W300 TW Manual De Usuario página 15

W-DMX STATUS
™
SETTING DMX START ADDRESS (DMX Address)
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
DMX Address (observe arrow) and confirm with ENTER. The display will show a three-digit num-
ber field and you can use the UP and DOWN controls to configure the desired DMX start address.
Confirm the entry with ENTER and press MODE to return to the main display (in the example,
„DMX address 001").
---------------- Menu ----------------
CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
DMX Mode (observe arrow) and confirm with ENTER. In the submenu, you can now select the
desired DMX mode with UP and DOWN.
Confirm your selection with ENTER. Tables with the channel assignments can be found in these
instructions under DMX CONTROL.
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
001
- DMX Address
001
5xx
15