Corghi EYELIGHT Plus Diagnostic Line Manual De Uso página 56

indicating the residual rotation torque unbal-
ance level (left indicator) and static rotation
torque level (right indicator).
2.
selects the required operator:
- This button can be used to change operator
quickly.
- 3 operators can be selected (1, 2 or 3) and
named (see the "Customisation" section).
- When a new operator is selected, the machine
resets the parameters that were active at the
last recall.
The stored parameters are:
- Balancing mode; Dynamic, ALU, etc...
- Wheel dimensions.
- Last phase of OPT.
- General machine settings: grams/ounces,
sensitivity x5/x1, etc...
3.
enables/disables the iPos programme (intel-
ligent positioning):
- Selecting the following button defines the
wheel to be analysed:
- selects the front left wheel;
- selects the front right wheel;
- selects the rear right wheel;
- selects the rear left wheel;
pressing the button
able the iPos programme.
Once the data acquisition procedure is com-
plete, the programme suggests the optimal
position of the wheels on the vehicle.
For more detailed information refer to para-
graph 3.3 of the "Wheel Diagnosis Programme"
suite.
4.
Enables/disables the unbalance display
mode (gx1 or gx5).
- Select this button to display the unbalance
56
5.
-
-
-
- -from the print menu, the PDF file can be
If the
insert the USB key.
again to dis-
Press the "OK" button.
EYELIGHT Plus DiagnosticLine - Operator's manual
mass in grams:
to the nearest gram or 1/10 of an ounce
if the unit of measurement has been set to
ounces;
or to the nearest 5 grams or 1/4 of an
ounce if the unit of measurement has been
set to ounces.
print menu:
Select this button to access the print menu
for the programme that is running.
The following is possible in the menu:
Fill out the empty fields in the report by
pressing the text Entry button
Start the print process with the Print button
.
downloaded onto a USB key connected to the
machine by pressing the
screen,
When a USB key is inserted on the con-
nector at the side of the machine, it
is recognised and the following image:
on the screen.
.
button.
image appears on the
appears