Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION | P12
Operation
MAKING A BAG WITH A BAG ROLL:
S T E P
1
Plug the unit into a power source and then open the top cover.
S T E P
Place a bag roll into the bag roll storage chamber.
2
S T E P
Lift up the bag cutter rack.
3
Pull the required length of the bag roll out and place it under the bag cutter
S T E P
4
rack.
Place the bag cutter rack down, making sure the bag cutter knob is fully to
S T E P
the left or to the right. Then slide the cutter knob from one end to the other
5
end to cut the bag.
Put one end of the bag on top of the dual seal strip, but make sure the end
S T E P
6
does not enter the vacuum chamber.
S T E P
Close the lid and place the 'Easy Lock Handle' in the 'Lock' position.
7
S T E P
Press the 'Seal' button to seal one end of the bag.
8
Lift the 'Easy Lock Handle' to the 'Open' position to open the cover and take
S T E P
9
the bag out of the machine. The bag is now ready for vacuum sealing.
INSTRUCTION | P13
Operation
Publicidad
