6. Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site
Service Programs are also available from Tripp Lite. For more information on service, visit tripplite.com/support. Before
returning your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate
from a misreading of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit tripplite.com/support.
3. If the problem requires service, visit tripplite.com/support and click the Product Returns link. From here you can
request a Returned Material Authorization (RMA) number, which is required for service. This simple on-line form will
ask for your unit's model and serial numbers, along with other general purchaser information. The RMA number, along
with shipping instructions will be emailed to you. Any damages (direct, indirect, special or consequential) to the product
incurred during shipment to Tripp Lite or an authorized Tripp Lite service center are not covered under warranty.
Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid.
Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your
sales receipt. Return the product for service using an insured carrier to the address given to you when you request the
RMA.
7. Maintenance
Your Inverter/Charger requires no maintenance and contains no user-serviceable or replaceable parts, but should be
kept dry at all times. Periodically check, clean and tighten all cable connections as necessary, both at the unit and at the
battery.
8. Specifications
Model
Capacity
Nominal DC Voltage
Output Voltage Range
Peak Efficiency
Power Factor
Overload Protection
Transfer Time
Cold-Start Voltage
Low-Voltage Alarm
Low-Voltage Alarm Recovery
Dimensions (W x H x D)
Net Weight
Shipping Weight
APSWX4KP48VMPPT
3.2kVA/3.2kW
20s@101%~120% load, 10s@121%~150% load, 5s@≥150% load
10 ms typical (UPS); 20 ms typical (Appliances)
295 x 458 x 120 mm
10.35 kg
11.25 kg
28
APSWX6KP48VMPPT
5.5kVA/5.5kW
48V
230VAC+/-5%
>/=90%
1.0
46VDC
36-50VDC
44VDC
11.35 kg
12.35 kg