Tripp-Lite APSWX Serie Manual De Instrucciones página 9

2. Features
2.3.3 Battery First
The battery system will supply power to the connected load as first priority. If the voltage gets too low and utility or
generator power is present, utility power or generator power will take over and supply power to the connected loads and
recharge the battery system. Once the battery system is recharged, the Inverter/Charger will switch back to the battery
system to supply power to the connected load.
To load
Utility power input
2.3.4 Hybrid Modes
Solar + Utility: Solar energy provides power to the connected loads as the first priority. If solar energy is not sufficient to
power all loads, utility will supply power to the connected loads at the same time while charging the battery.
To load
Utility power input
Discharging
Solar power input
Charging
9