Publicidad
Idiomas disponibles
Idiomas disponibles
GARANT Vario workbench
de
1.
Device overview – GridLine Vario workbench
The device overview (in addition to the worktop) depends on the configuration selected.
bg
2.
General information
Read and observe the operating instructions, keep them as a reference for later and ensure they are accessible at
all times.
da
3.
Safety
en
3.1.
SYMBOLS AND MEANS OF REPRESENTATION
Warning symbols
fi
fr
it
i
3.2.
GROUPED SAFETY MESSAGES
hr
CAUTION
Workbench tipping over
lt
Risk of injury to hands, feet and body due to unrestrained objects falling and risk of the workbench tipping due to incorrect
loading.
»
Wear foot protection and safety gloves.
nl
»
Do not store pointed or other workpieces without restraint.
»
Do not open several drawers at once.
»
Anchor the workbench to the floor.
no
»
Comply with the maximum load capacity of the individual drawers and storage shelves.
»
Comply with the maximum load capacity of the workbench.
pl
3.3.
INTENDED USE
Use the workbench only when it is in a good condition. If any faults occur which may affect safety, have them rectified
without delay.
pt
Only attach components at the holes intended for this purpose.
Use exclusively approved Hoffmann Group accessories for modification or rebuilding.
For work in indoor industrial environments. For use on dry solid floors.
ro
Operate only in a dry environment.
3.3.1.
Support leg
sv
Support leg for installation on the worktop of the GridLine Vario workbench.
Installation only in conjunction with a rear panel, drawer casing or stabilising plates.
Cable ducts in the leg for laying connecting cables.
sk
3.3.2.
Stabilising plate
Stabilising plate for installation on the worktop and support leg of the GridLine Vario workbench.
For stiffening and stabilising the workbench.
sl
Double stabilising plate: for connecting two worktops. For flush alignment of two worktops, the joint strip must also be
installed.
3.3.3.
Rear panel and storage shelf
es
Rear panel or storage shelf for installation on the support leg of the GridLine Vario workbench.
Installation as a storage shelf only in conjunction with the stabilising plates.
cs
Storage shelf for storage of workpieces and tools.
Rear panel as a modesty board and for stabilising the workbench.
Perform installation only on a workbench with two support legs.
hu
Mount only on suitable holes.
30
CAUTION
NOTICE
Meaning
Indicates a hazard which if not avoided may lead to minor or
moderate injury.
Indicates a hazard which if not avoided may lead to damage
to property.
Indicates useful tips and instructions together with informa-
tion for efficient and problem-free operation.
Publicidad
