Creating A New Project - Hilti PS 200 Manual De Instrucciones

7.3.4.2 Creating a new project

Press Create Project to create a new project. A short
message confirming that the project was successfully
created appears before the project then appears.
Projects created in the monitor receive a standard name
beginning with the prefix "Prj" and a consecutive num-
ber assigned by the monitor. The names to be used for
User, Client and Object remain unspecified, but can be
edited as described in Section 7.3.4.3, or using the PC
application after transferring the data.
Projects may also be created in the PC application and
uploaded to the monitor. The PC application allows pro-
ject names of your choice to be entered together with
information under User, Customer and Object.
7.3.4.3 Editing
Names can be assigned under Project, User, Customer
or Object. Use Select to choose the appropriate field for
editing and Done to confirm completion of editing.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070389 / 000 / 00
7.3.4.4 Show all projects
All Projects shows an overview of all projects saved in
the monitor. Projects can be opened, selected (marked
individually or marked collectively) or deleted.
Done takes the user back to the previously opened pro-
ject or starting point.
7.3.4.5 Deleting a project
Press Delete Project to delete the currently selected pro-
ject.
Press OK to confirm or Cancel to abort the operation
and return to the project screen.
en
57