Britax Poplar S Guia Del Usuario página 17

Adjusting the Buckle Position
Unbuckle the harness.
1.
2. Open the ClickTight.
a. Lift the front
cover flap.
b. Squeeze the
ClickTight release
buttons.
3. Locate the buckle
strap retainer on
the underside of
the ClickTight.
4. Turn the buckle strap
retainer sideways and
push it through the
seat pan slot and the
seat pan cover.
5. Route the buckle strap
through the desired
position and pull the
buckle strap retainer
completely through
the seat pan cover and
seat pan slot.
6. Pull the buckle gently
to sit the buckle strap
retainer flat.
Replace the front of the
7.
seat cover.
8. Close ClickTight.
1
2
b
3
4
5
8
a
Outer Slot
Middle Slot
Inner Slot
15