Publicidad
Idiomas disponibles
Idiomas disponibles
25
|
ANTENNA
IN
$ To AV
OUT connector
4 Remove the aerial cable from the TV receiver.
Connect the aerial cable to the ANTENNA
IN
terminal of the RF unit.
Connect the RF OUT terminal of the. RF unit
to the aerial terminal of the TV receiver using
the provided aerial cable.
On
=
PRECAUTIONS
FOR
RF-P1E
@For exclusive use with the GR-C7E VideoMovie.
@Do not disassemble or remodel the RF-P1E.
®Do not expose it to strong shocks.
@Unpiug
the
connected
equipment
during
lightning storms. (Never touch the aerial cable.)
TV
receiver
Aerial! cable
(provided)
To aerial terminal
Connect
the VIDEO/AUDIO
INPUT
cable of
the RF
unit to the AV OUT connector of the
JVG
yy.
VIDEO/AUDIO INPUT
Adjust
the
RF
converter
output
channel
according to your VIDEO CHANNEL.
Remove
the cover
Rear view
@RE
converter channel adjustment screw
The RF unit permits playback of video and audio
recordings through a TV receiver. The signals from
the RF unit are viewed through a vacant channel
not used for broadcasting in your area. The output
frequency
of the RF converter
has been set to
correspond to a broadcast on UHF channel 36. To
view
playback
pictures
from
the GR-C7E
with
your TV receiver, tune its specified AV channel to
UHF
channel
36. If channel 36 is employed for
Publicidad
