Publicidad
Idiomas disponibles
Idiomas disponibles
SMA Solar Technology AG
3. Press the cable support sleeve out of the threaded sleeve.
4. Feed the network cable through the swivel nut and
threaded sleeve. Attach the cable support sleeve to
the network cable.
5. Press the cable support sleeve into the threaded
sleeve.
6. Insert the network plug of cable into the product's
network port. Ensure that the cable is correctly
locked in place. Turn the threaded sleeve onto the
thread of the network port on the product.
7. Screw the swivel nut onto the threaded sleeve.
8. If you would like to establish a direct connection, connect the other end of the network cable
directly to the end device.
9. If you would like to integrate the product into a local network, connect the other end of the
network cable to the local network (e.g. via a router).
Operating manual
6 Electrical Connection
2
1
2
3
2
1
EVCxx-10-BE-en-11
1
39
Publicidad
