Publicidad
Idiomas disponibles
Idiomas disponibles
SMA Solar Technology AG
Connection with WPS
Requirement:
☐ The smart device must have a WPS function.
Procedure:
1. Enable WPS function on the product. Tap on the enclosure lid of the product twice.
☑ The blue LED flashes quickly for approx. two minutes. The WPS function is active during
this time.
2. Enable the WPS function on your smart device.
3. Open the web browser of your smart end device and enter http://smalogin.net in the
address bar.
Connection with Wi-Fi network search
1. Search for Wi-Fi networks with your smart device.
2. Select the SSID of the product SMA[serial number] in the list with the detected Wi-Fi
networks.
3. Enter the device-specific Wi-Fi password (see WPA2-PSK on the type label).
4. Open the web browser of your smart end device and enter http://smalogin.net in the
address bar.
☑ The welcome or login page of the user interface is displayed.
5. If the login page of the user interface does not open, enter the IP address 192.168.12.3 or, if
your smart device supports mDNS services, SMA[serial number].local or http://
SMA[serial number] in the address bar of the web browser.
8.1.2
Establishing a Connection via Ethernet in the local
network
New IP address for connecting with a local network
If the product is connected to a local network (e.g. via a router), the product will receive a new
IP address. Depending on the type of configuration, the new IP address will be assigned
automatically by the DHCP server (router) or manually by you. Upon completion of the
configuration, the product can only be reached via the following access addresses:
• Generally applicable access address: IP address manually assigned or assigned by the
DHCP server (router) (identification via network scanner software or network
configuration of the router).
• Access address for Apple and Linux systems: SMA[serial number].local (e.g.
SMA0123456789.local)
• Access address for Windows and Android systems: https://SMA[serial number] (e.g.
https://SMA0123456789)
Requirements:
☐ The product must be connected to the local network via a network cable (e.g. via a router).
Operating manual
8 Operation
EVCxx-10-BE-en-11
45
Publicidad
