Publicidad
Idiomas disponibles
Idiomas disponibles
11 Troubleshooting
Event number
6630
7001
7312
7320
7321
7329
7330
56
EVCxx-10-BE-en-11
Message, cause and corrective measures
Overcurrent at point of interconnection, fast stop triggered
An overcurrent has been detected at the connection point. This triggered a fast
stop.
The temperature sensor for the indoor temperature is defective.
The measurement is permanently outside the measuring range limits.
Corrective measures:
• Contact the Service.
Update completed
The device was successfully updated
The firmware update was completed successfully.
Error during transfer of firmware update with version number ##.
Procedure aborted.
The firmware update was not successful.
Corrective measures:
• Retry update.
• If this message is displayed again, contact the Service.
Condition test successful
The testing of the update conditions was successful. The firmware update
package is suitable for this product.
Condition test failed
The testing of the update conditions was not successful. The firmware update
package is not suitable for this product.
Corrective measures:
• Retry update.
• Ensure that the selected update file is suitable for this product.
• If this message is displayed again, contact the Service.
SMA Solar Technology AG
Operating manual
Publicidad
